Get Robeson Building

Residential permits are not required for construction, alterations, repairs or replacements that will cost fifteen thousand dollars ($15,000) or less in any single-family residence, unless the work involves: the addition, repair or replacement of load bearing structures.

Failing to obtain a permit when required may result in substantial fines or being ordered to remove the offending project or incur costs to certify compliance with the applicable codes; it depends. What may surprise licensees is how many seemingly minor improvements/repairs may require a permit.

When a Permit is Needed. For any accessory building, such as a shed, with any dimension exceeding 12 feet, The North Carolina State Building Code requires that a permit be issued, though a 12'x12' shed doesn't normally need a permit.

A Zoning Fence Permit is needed to a fence on residential or nonresidential property. Fences that are made of wood, metal or masonry products follow this process for approval unless the masonry construction creates a wall higher than four feet.

Residential permits are not required for construction, alterations, repairs or replacements that will cost fifteen thousand dollars ($15,000) or less in any single-family residence, unless the work involves: the addition, repair or replacement of load bearing structures.

Permit Fees Permit TypeFeeMajor Permit for development that involves the filling or excavation of more than one acre of wetlands or open-water areas, or 150 linear feet or more of stream$475Major development extension request$100Minor modification to a Major Permit$100Major modification to a Major Permit$250 $400 $47516 more rows

Failing to obtain a permit when required may result in substantial fines or being ordered to remove the offending project or incur costs to certify compliance with the applicable codes; it depends. What may surprise licensees is how many seemingly minor improvements/repairs may require a permit.

You can place a fence anywhere on your property, with the exception of any easements and/or rights of way. You are advised to stay at least six (6) inches off of your property line to avoid any civil disputes with your neighbor(s).

When a Permit is Needed. For any accessory building, such as a shed, with any dimension exceeding 12 feet, The North Carolina State Building Code requires that a permit be issued, though a 12'x12' shed doesn't normally need a permit.

The following projects do not require a permit: Asphalt or gravel driveways. Awnings (wall mounted only) Exterior work under $15000 - Non Structural Only. Interior work under $15000 - Non Structural Only. Non-residential farm buildings. ... Non-structural slab (no footers for future building construction)

A Zoning Fence Permit is needed to a fence on residential or nonresidential property. Fences that are made of wood, metal or masonry products follow this process for approval unless the masonry construction creates a wall higher than four feet.

Most neighborhoods within Asheville, NC, are managed by HOA's or Homeowners Associations. Due to this, installing a fence or any other outdoor improvements requires the HOA board's approval. While these rules and laws can seem frustrating, they also help preserve property values for you and your neighbors.

Permit Fees Permit TypeFeeMajor Permit for development that involves the filling or excavation of more than one acre of wetlands or open-water areas, or 150 linear feet or more of stream$475Major development extension request$100Minor modification to a Major Permit$100Major modification to a Major Permit$250 $400 $47516 more rows

Under North Carolina law (G.S. 87-1), the construction of any building, highway, public utilities, grading or any improvement or structure where the cost of the construction is $30,000 or more must be superintended (supervised and managed) by a general contractor who is licensed in this state.

You can place a fence anywhere on your property, with the exception of any easements and/or rights of way. You are advised to stay at least six (6) inches off of your property line to avoid any civil disputes with your neighbor(s).

Failing to obtain a permit when required may result in substantial fines or being ordered to remove the offending project or incur costs to certify compliance with the applicable codes; it depends. What may surprise licensees is how many seemingly minor improvements/repairs may require a permit.

The following projects do not require a permit: Asphalt or gravel driveways. Awnings (wall mounted only) Exterior work under $15000 - Non Structural Only. Interior work under $15000 - Non Structural Only. Non-residential farm buildings. ... Non-structural slab (no footers for future building construction)

Under California's Building Code, you must obtain a permit before building a fence that will be over 6 feet tall unless the top 2 feet of the fence will be barbed wire. For a front yard fence, the maximum height is 42 inches. For a backyard fence, the maximum height is 72 inches.

Most neighborhoods within Asheville, NC, are managed by HOA's or Homeowners Associations. Due to this, installing a fence or any other outdoor improvements requires the HOA board's approval. While these rules and laws can seem frustrating, they also help preserve property values for you and your neighbors.

NOTICE: You can get a permit from the Permits & Inspections Department located at 30 Valley Street, Asheville, NC. The department's operating hours are Monday - Friday from 8:00 am to 5:00 pm. No permit applications can be processed after 4:00 pm.

Under North Carolina law (G.S. 87-1), the construction of any building, highway, public utilities, grading or any improvement or structure where the cost of the construction is $30,000 or more must be superintended (supervised and managed) by a general contractor who is licensed in this state.

Failing to obtain a permit when required may result in substantial fines or being ordered to remove the offending project or incur costs to certify compliance with the applicable codes; it depends. What may surprise licensees is how many seemingly minor improvements/repairs may require a permit.

Under California's Building Code, you must obtain a permit before building a fence that will be over 6 feet tall unless the top 2 feet of the fence will be barbed wire. For a front yard fence, the maximum height is 42 inches. For a backyard fence, the maximum height is 72 inches.

NOTICE: You can get a permit from the Permits & Inspections Department located at 30 Valley Street, Asheville, NC. The department's operating hours are Monday - Friday from 8:00 am to 5:00 pm. No permit applications can be processed after 4:00 pm.

Residential permits are not required for construction, alterations, repairs or replacements that will cost fifteen thousand dollars ($15,000) or less in any single-family residence, unless the work involves: the addition, repair or replacement of load bearing structures.

Failing to obtain a permit when required may result in substantial fines or being ordered to remove the offending project or incur costs to certify compliance with the applicable codes; it depends. What may surprise licensees is how many seemingly minor improvements/repairs may require a permit.

When a Permit is Needed. For any accessory building, such as a shed, with any dimension exceeding 12 feet, The North Carolina State Building Code requires that a permit be issued, though a 12'x12' shed doesn't normally need a permit.

A Zoning Fence Permit is needed to a fence on residential or nonresidential property. Fences that are made of wood, metal or masonry products follow this process for approval unless the masonry construction creates a wall higher than four feet.

Permit Fees Permit TypeFeeMajor Permit for development that involves the filling or excavation of more than one acre of wetlands or open-water areas, or 150 linear feet or more of stream$475Major development extension request$100Minor modification to a Major Permit$100Major modification to a Major Permit$250 $400 $47516 more rows

You can place a fence anywhere on your property, with the exception of any easements and/or rights of way. You are advised to stay at least six (6) inches off of your property line to avoid any civil disputes with your neighbor(s).

The following projects do not require a permit: Asphalt or gravel driveways. Awnings (wall mounted only) Exterior work under $15000 - Non Structural Only. Interior work under $15000 - Non Structural Only. Non-residential farm buildings. ... Non-structural slab (no footers for future building construction)

Most neighborhoods within Asheville, NC, are managed by HOA's or Homeowners Associations. Due to this, installing a fence or any other outdoor improvements requires the HOA board's approval. While these rules and laws can seem frustrating, they also help preserve property values for you and your neighbors.

Under North Carolina law (G.S. 87-1), the construction of any building, highway, public utilities, grading or any improvement or structure where the cost of the construction is $30,000 or more must be superintended (supervised and managed) by a general contractor who is licensed in this state.

Failing to obtain a permit when required may result in substantial fines or being ordered to remove the offending project or incur costs to certify compliance with the applicable codes; it depends. What may surprise licensees is how many seemingly minor improvements/repairs may require a permit.

Under California's Building Code, you must obtain a permit before building a fence that will be over 6 feet tall unless the top 2 feet of the fence will be barbed wire. For a front yard fence, the maximum height is 42 inches. For a backyard fence, the maximum height is 72 inches.

NOTICE: You can get a permit from the Permits & Inspections Department located at 30 Valley Street, Asheville, NC. The department's operating hours are Monday - Friday from 8:00 am to 5:00 pm. No permit applications can be processed after 4:00 pm.