Get Epa Refrigerant Log Sheet Pdf

ABSORPTION AIR CONDITIONING AND REFRIGERATION LOG ADDITIONAL LOG S REQUEST TO Engineering Department The Hartford Steam Boiler Inspection and Insurance Company One State Street P. O. Box 5024 Hartford CT 06102-5024. Please specify which log and how many copies per log. MANUFACTURER LOCATION AIR TEMPERATURE DATE OR TIME Outside Air Conditioned Space MACHINE S ABSOLUTE PRESSURE Chilled In Out Absorber Condenser GENERATOR CAPACITY Water CONTROL Temperature VALVE or Steam POSITION Pressure NUMBER SOLUTION PURGE UNIT SOLUTION LEVEL OPER* ANALYSIS IN ABSORBER Time Date SIZE CHEMICAL ADDED INTERNALLY Type Amount INITIALS OF WATCH OR SHIFT ENGINEER PERFORM THE FOLLOWING TESTS ANNUALLY DATE CLEANED DATE OF EDDY CURRENT TESTED Operating Safety Control Tests SETTING CONDITION DATE TESTED INITIALS LOW REFRIGERANT LOW CHILLED FLOW SWITCHES IMPORTANT INSTRUCTIONS For reliable and uninterrupted service the following maintenance items should be given attention as indicated Tubes 1. The water side surfaces should be cleaned annually. 2. Eddy current analysis should be performed on condenser tubes within 3 to 5 years of service and on evaporator tubes within 5 to 7 years of service. The detection of any wear corrosion or deterioration of tubes will determine when subsequent testing of the tubes should be performed* 2102 REV 6/08 ENG LITHIUM BROMIDE SOLUTION An analysis should be made twice a year by a testing laboratory that is thoroughly familiar with the chemistry of the solution in the machine. All safety and operating controls should be tested annually calibrated to design conditions and their set points recorded* Defective safety devices and controls should be replaced* CANNED MOTOR PUMP UNIT Overhaul units after 3 years of normal service. Examine clean or replace seals bearings cooling and seal water passages. Other parts such as pump impeller motor stator and rotor should be examined for defects and proper repairs or replacement made. Use reverse side to remarks concerning Service Company/Name and telephone number Date of service call Work performed Date and time machine shutdown on safety control or solidification*. O. Box 5024 Hartford CT 06102-5024. Please specify which log and how many copies per log. MANUFACTURER LOCATION AIR TEMPERATURE DATE OR TIME Outside Air Conditioned Space MACHINE S ABSOLUTE PRESSURE Chilled In Out Absorber Condenser GENERATOR CAPACITY Water CONTROL Temperature VALVE or Steam POSITION Pressure NUMBER SOLUTION PURGE UNIT SOLUTION LEVEL OPER* ANALYSIS IN ABSORBER Time Date SIZE CHEMICAL ADDED INTERNALLY Type Amount INITIALS OF WATCH OR SHIFT ENGINEER PERFORM THE FOLLOWING TESTS ANNUALLY DATE CLEANED DATE OF EDDY CURRENT TESTED Operating Safety Control Tests SETTING CONDITION DATE TESTED INITIALS LOW REFRIGERANT LOW CHILLED FLOW SWITCHES IMPORTANT INSTRUCTIONS For reliable and uninterrupted service the following maintenance items should be given attention as indicated Tubes 1. The water side surfaces should be cleaned annually. 2. Eddy current analysis should be performed on condenser tubes within 3 to 5 years of service and on evaporator tubes within 5 to 7 years of service.