Get Playground Inspection Form

Visual routine inspections, performed daily or weekly, will help maintain a safe environment for children at play. Periodic inspections should be performed by a CPSI (or with a guided inspection software like Park Protector) monthly, quarterly, or annually.

CHECK THE EQUIPMENT FOR CRACKS, BENDING, WARPS, RUSTING, OR BREAKAGE OF ANY COMPONENT CHECK FOR TRIPPING HAZARDS, SUCH AS EXPOSED FOOTINGS, ROOTS, ROCKS, ETC. CHECK FOR LOOSE NUTS, BOLTS, AND CAPS OR PROTRUDING BOLTS WITH SHARP EDGES AND NO CAPS CHECK FOR LACK OF LUBRICATION ON MOVING PARTS.

Use equipment properly — slide feet-first, don't climb outside guardrails, no standing on swings, etc. Always check to make sure no other kids are in the way if they're going to jump off equipment or slide, and land on both feet with their knees slightly bent.

If a playground inspection is done, it must be completed by a Certified Playground Safety Inspector (CPSI) approved by the Bureau of Community and Health Systems, Child Care Licensing Division.

5 Things Every Playground Needs Surfacing. Playground surfacing is something that can often be overlooked when designing a playground. ... Rest Areas. Rest areas such as picnic tables and benches may not be the most exciting part of the playground but they are important. ... Amenities.

Check for sharp points or edges in equipment. Look out for tripping hazards, like exposed concrete footings, tree stumps, and rocks. Make sure elevated surfaces, like platforms and ramps, have guardrails to prevent falls. Check playgrounds regularly to see that equipment and surfacing are in good condition.

Visual routine inspections, performed daily or weekly, will help maintain a safe environment for children at play. Periodic inspections should be performed by a CPSI (or with a guided inspection software like Park Protector) monthly, quarterly, or annually.

Modern playgrounds usually include a combination of swings, slides, climbers, spring riders, spinners, and sensory panels to maximize fun, safety, and accessibility. Many new types of playground equipment will also help improve coordination, strength, and critical thinking (among other benefits).

How Do I Clean My Playground Equipment? The CDC recommends using a bleach solution of 5 tablespoons (1/3 cup) bleach per gallon of water or 4 teaspoons of bleach per quart of water. Do NOT use bleach as it may cause colors to fade. Scrub with soap and water solution using soft sponge or brush.

CHECK THE EQUIPMENT FOR CRACKS, BENDING, WARPS, RUSTING, OR BREAKAGE OF ANY COMPONENT CHECK FOR TRIPPING HAZARDS, SUCH AS EXPOSED FOOTINGS, ROOTS, ROCKS, ETC. CHECK FOR LOOSE NUTS, BOLTS, AND CAPS OR PROTRUDING BOLTS WITH SHARP EDGES AND NO CAPS CHECK FOR LACK OF LUBRICATION ON MOVING PARTS.

Check depth of protective surfacing to ensure adequate (check minimum 3 locations) Remove broken glass and/or foreign debris on play equipment or concealed in protective surfacing Unwrap swings from around toprail (of any swings) Check for kinked, twisted, broken or worn swing chain Check for drainage problems and/or ...

A playground safety audit is a one-time process that focuses on compliance with the current standard of care. ■ Maintenance inspections are conducted at regular intervals and focus on immediate hazards caused by aging or damaged equipment—e.g., worn swing hangers or missing fasteners.