Get En 10204 2 2

The EN 10204 standard specifies the different types of inspection documents provided to the purchaser (in ance with the requirements of the order) for the delivery of all metallic products. For example: plates, sheets, bars, forgings, castings.

EN 10204 2.1 certification is the lowest level of certification to EN 10204.In this the manufacturer, or mill, simply declares that he has produced the steel plates to the purchasers specification or order requirements. No evidence in the form of test results is included in the certificate.

Declaration of compliance with the order ing to DIN EN 10204-2.1 (Batch certificate) Certificate in which the manufacturer confirms that the delivered products meet the requirements of the order, without specifying tests or test results. Delivery will be effected within 2-3 weeks days with receipt of payment.

A 3.1 inspection certificate can certify a batch of components or the raw material used in the manufacturing of a component. For example, a stockist of bar may supply a piece of bar with a 3.1 inspection certificate.

Certificate EN 10204 type 2.2 These tests are the tests published in the product data sheet. Thus, a 2.1 certificate containing laboratory test results becomes a 2.2 certificate. Another model of certificate 2.2 is the result of a random dimensional analysis performed on a product from a given batch.

A 2.2 certificate is a statement of compliance with the order by the manufacturer based on non-specific inspections by the manufacturer. The 2.1 / 2.2 inspection certificates do not allow for any component traceability.

The EN 10204 Type 3.1 Inspection Certificate are actual test results from the material in the lot from which the steel products have been supplied (formally referred to as “specific testing”).