Get Ladder Inspection Policy - International Paper

Inspect fixed ladders periodically, at least annually. Inspections may be required more frequently depending on the organization's requirements or the ladder's exposure to elements such as weather or salt air. Report any defect promptly. Keep a record of every inspection.

Ladders shall be inspected for defects prior to each day's use, and after any occurrence, such as a fall, which could damage the ladder. Ladder usage. Ladders made by fastening rungs or devices across a single rail are prohibited. As platforms, runways or scaffolds.

The ladder should be of sound construction, properly maintained and securely fixed. Assembly should be sufficiently rigid and stable to ensure safety of the user under normal conditions. Handrails should extend at least 1100mm above landing. Stiles should extend to the height of guarding.

Ladder inspections are an essential part of owning them and using them safely. Ladders should be checked by the user before every use and on a regular basis by a competent person every three to six months. The first rule of ladder safety is to do consistent checks and pre-checks.

Fixed ladders. The minimum size (cross-section) of grab bars is the same size as the rungs of the ladder. A minimum perpendicular distance of 30 inches (76 cm) from the centerline of the steps or rungs to the nearest object on the climbing side.

1910.23(b)(9) – Ladders are inspected before initial use in each work shift and more frequently as necessary to identify any visible defects that could cause employee injury.

Employers need to make sure that any ladder or stepladder is both suitable for the work task and in a safe condition before use. As a guide, only use ladders or stepladders that: have no visible defects. They should have a pre-use check each working day.

They must be inspected regularly to ensure that they are in safe condition. So when should you inspect a ladder and by whom? – By the user each time before they are used. – By someone carrying out a formal inspection every 3 to 6 months (records should be kept of these formal inspections).