Get Index Of /files/t-class-old/study_guide

There should be a mark showing which side. if scanning from the glass, face down, because the scanner is looking up from under the glass. if using the ADF (most people use adf for fax for multiple page), face up.

This is a precautionary feature that ensures you will not lose your messages in the event of a power failure. Your machine's display will indicate when you have a fax stored in memory. If you would like to preview your faxes before you print them, please refer to: Fax Preview.

reference: Make sure that the machine is turned on. Press the FAX button. ... Press the left FunctiON button. ... Select Memory reference, then press the OK button. Use the button to select Delete all documents in memory, then press the OK button. ... Use the button to select Yes, then press the OK button.

Information on Received Faxes By default, received faxes will be printed immediately after they are received. In addition, faxes will be stored in the printer's memory automatically when they are received. However, the printer's memory has an upper limit on the number of faxes or subjects it can contain.

If the memory is full, try sending a monochrome fax using the Direct Send feature or sending your faxes in smaller batches. If the product cannot print a received fax due to a product error, such as a paper jam, the memory full error may appear. Clear any product errors, then ask the sender to resend the fax.

How do I delete the received faxes that are stored in my Brother machine's memory? Press MENU/SET, 2 (Fax), 5 (Remote Fax Opt), 1 (Fwd/Page/Store). Press the UP OR DOWN ARROW key to select Off. Press the MENU/SET key. Press 1. Press the STOP/EXIT key.

To store Speed Dial numbers, please follow these steps: Press Menu/Set, 2 (Fax), 3 (Set Quick-Dial), 1 (Speed-Dial). Use the dial pad to select the two-digit location (01 – 80) on which you want to store the number and press Menu/Set. Enter the number you want to store (up to 20 digits) and press Menu/Set.

Use the Fax Storage feature to store incoming faxes in the machine's memory. Retrieve your stored fax messages from your fax machine when you are at another location using the Remote Retrieval commands. Your machine will print a backup copy of each stored fax.