Get hot work permit form 2009-2024

A Hot Work Permit authorised by the Premise Responsible Person or their nominated representative and the Contractor/Person in control of the Hot Work will be required. You should use this Hot Work Permit when maintenance work is being undertaken, and you are the individual authorised to issue Hot Work Permits. 1.

In a typical working environment, cold work activities involve working on pipelines, adding values, spades or blanks, erecting scaffolding, adding insulation, or involving any mechanical or civil maintenance work without using any flaming materials.

The American Petroleum Institute defines hot work as any work that involves welding, burning, or hot tapping or the use of equipment near an open flame or equipment capable of generating a spark. Cold work describes a situation where the task being performed does not generate any sources of ignition.

The Hot Work Permit is the means by which the departments of Facilities Management, Facilities Planning and Construction, and the department of Environmental Health & Safety & Risk Management Services will be able to keep track of construction activities that involve hot work, and that these activities are being ...

Hot works include any operation that uses open flames or the local application of heat and friction. Examples include: Welding. Soldering.

Cold work permits are used in hazardous maintenance work that does not involve “hot work”. Cold work permits are issued when there is no reasonable source of ignition, and when all contact with harmful substances has been eliminated or appropriate precautions taken.

A hot work permit is used to prevent fire or explosion and will specifically detail the work to be carried out, how and when it is to be done and the precautions to be taken. The use of a permit system does not, by itself, make the job safe.

Hot-work permits are required for any operation involving open flames or producing heat and/or sparks and must be prepared by a competent person.