Get Operation And Maintenance Manual - Nilfisk

Your Nilfisk pressure washer is covered by a domestic use warranty of up to 5 years - 2 years as standard & an additional 3 years coverage when you register your machine with Nilfisk within 30 days of purchasing.

The dust bag may be full and needs to be changed, see instructions in hand book. The prefilter or HEPA filter may be blocked and have to be changed, see instructions. The hose handle, hose, tube or nozzle may be blocked and needs to be cleaned. The thermal fuse may have blown, see instructions.

The dust bag may be full and needs to be changed, see instructions in hand book. The prefilter or HEPA filter may be blocked and have to be changed, see instructions. The hose handle, hose, tube or nozzle may be blocked and needs to be cleaned. The thermal fuse may have blown, see instructions.

New machine warranty: Covers 5 years parts, 2 years labor, 180 days travel. Tank warranty is for eight years.

0:31 2:23 How to Replace Vacuum Hose on the Nilfisk Adfinity 20D - YouTube YouTube Start of suggested clip End of suggested clip But that's how you take it out now this is a brand new vacco. So to it just reverse theMoreBut that's how you take it out now this is a brand new vacco. So to it just reverse the steps feed it back down go ahead and put your hose clamp. Back on then put it back on the recovery tank.

New machine warranty: Covers 5 years parts, 2 years labor, 180 days travel. Tank warranty is for eight years.

The Nilfisk DTE range of pressure washers are hand-built in the UK and are designed to cope with continuous use in the most demanding operator environments. Focused on quality we specialise in supplying competitively priced industrial pressure washers to a wide range of industries from automotive to food.

0:31 2:23 How to Replace Vacuum Hose on the Nilfisk Adfinity 20D - YouTube YouTube Start of suggested clip End of suggested clip But that's how you take it out now this is a brand new vacco. So to it just reverse theMoreBut that's how you take it out now this is a brand new vacco. So to it just reverse the steps feed it back down go ahead and put your hose clamp. Back on then put it back on the recovery tank.

The Nilfisk DTE range of pressure washers are hand-built in the UK and are designed to cope with continuous use in the most demanding operator environments. Focused on quality we specialise in supplying competitively priced industrial pressure washers to a wide range of industries from automotive to food.

Your Nilfisk pressure washer is covered by a domestic use warranty of up to 5 years - 2 years as standard & an additional 3 years coverage when you register your machine with Nilfisk within 30 days of purchasing.

Your Nilfisk pressure washer is covered by a domestic use warranty of up to 5 years - 2 years as standard & an additional 3 years coverage when you register your machine with Nilfisk within 30 days of purchasing.

Your Nilfisk pressure washer is covered by a domestic use warranty of up to 5 years - 2 years as standard & an additional 3 years coverage when you register your machine with Nilfisk within 30 days of purchasing.

Pump sucking Valves dirty, worn out or stuck Pump seals worn out Check that hoses and connections are airtight. Clean and replace or refer to local Nilfisk distributor. Machine stops Fuse has blown Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Replace fuse.

Your Nilfisk pressure washer is covered by a domestic use warranty of up to 5 years - 2 years as standard & an additional 3 years coverage when you register your machine with Nilfisk within 30 days of purchasing.

Machine stops Fuse has blown Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Replace fuse. Switch off other machines. Check that the mains voltage corresponds to specification on the model tag. Leave the washer for 5 minutes to cool down.

Pump sucking Valves dirty, worn out or stuck Pump seals worn out Check that hoses and connections are airtight. Clean and replace or refer to local Nilfisk distributor. Machine stops Fuse has blown Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Replace fuse.

Thermal cut out has activated Blockages or dirty filters may cause this to happen, the safety cut off will activate and switch off the electrical supply. If the cleaner has cut out, simply unplug and check for a blockage or dirty filters.

Machine stops Fuse has blown Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Replace fuse. Switch off other machines. Check that the mains voltage corresponds to specification on the model tag. Leave the washer for 5 minutes to cool down.

Thermal cut out has activated Blockages or dirty filters may cause this to happen, the safety cut off will activate and switch off the electrical supply. If the cleaner has cut out, simply unplug and check for a blockage or dirty filters.