Get Denso Glass Outerwrap - Unconventionalsolutions.biz - Unconventionalsolutions

Denso Tape Applications: Provides insitu corrosion prevention of gas, water, oil & other pipes as well as pipeline valves & fittings. Protection of tie bars, post-tensioned rods, cables and tanks. Sealing framework. General waterproofing medium, vapour barrier & thermal insulation.

Allow to dry for 20 minutes or until touch dry. Select as wide a width of tape as practical, e.g. 100mm wide for 150mm diameter pipe. Peel back about 0.5m of interleaving and apply the adhesive side of the tape firmly to the pipe.

Where additional protection of a Denso corrosion prevention system is required—for mechanical, impact or U.V. exposure purposes—a Denso protective outerwrap can be applied to encase the primary layer of protection and serve as a barrier between the inner layer and the external environment.

0:41 2:34 Against corrosion. Apply a thin uniform coat of Denso paste through the entire surface with a glovedMoreAgainst corrosion. Apply a thin uniform coat of Denso paste through the entire surface with a gloved hand brush array this serves as a primer before applying the petrolatum tape to the surface. Area.

Hand apply the Densyl Tape on the prepared steel surface. Apply tape with a 55% overlap and use slight tension to ensure tape is tight to the surface. When applying tape, smooth out all overlaps to ensure a complete seal.

DENSO®-Verte has even proven its innovative characteristics in less common applications, including use as a galvanic isolation layer, as a temporary seal to repair leaks in low-pressure gas lines, or to prevent corrosion on metal parts or pipe systems encased in concrete or screed.