Get Driver Solutions Pre Trip Inspection

7 Steps to Properly Conduct a Materials Inspection Pre-inspection Steps. Photos. Review Project Specifications. Physical Condition of Material. Make & Manufacturer. Confirm Certifications. Storage Requirements.

7 Steps to Properly Conduct a Materials Inspection Pre-inspection Steps. Photos. Review Project Specifications. Physical Condition of Material. Make & Manufacturer. Confirm Certifications. Storage Requirements.

0:50 5:21 Break it down into sections start at the top left to right to the bottom. And if you can do thatMoreBreak it down into sections start at the top left to right to the bottom. And if you can do that stick to the sequence stick to the patterns. That is going to help you to memorize.

During your CDL pre-trip inspection, you will be required to do a light check, coupling system, and an in-cab inspection. You may also have to do either the engine compartment, driver's door fuel area, or the trailer.

These steps include completing an overview of the vehicle; checking the engine compartment; starting the engine and inspecting inside the cab; turning off the engine and checking the lights; a walk-around inspection; checking the signal lights; and starting the engine and checking the brakes.

Make It Easy: Truck first, then trailer. ABC–Abrasions, Bruises, Cuts BBC–Bent, Broken, Cracked Not Leaking–air and liquid-holding parts. Wear Gloves–touch every part you inspect Order–inspect from the top down and from the center out.

Make It Easy: Truck first, then trailer. ABC–Abrasions, Bruises, Cuts BBC–Bent, Broken, Cracked Not Leaking–air and liquid-holding parts. Wear Gloves–touch every part you inspect Order–inspect from the top down and from the center out.

Wheel and tire inspections save lives. One item that may be overlooked is the need to inspect for items lodged between tires. The Commercial Vehicle Safety alliance recently changed its policies to denote that a solid object lodged between tires is grounds for a violation.