Get Staples Laminator Model 14346 Manual

Once your selections are made and all your materials are inside the laminating pouches nice and even, the crease end of the laminating pouch goes into the throat of the machine first. Always wait for your document to be completely finished and to come out the back of the machine.

What is the proper way to insert a laminating pouch into the laminator? Always put items in the appropriate size pouch. Place the item in the pouch centered and completely touching the sealed edge. Insert pouch into laminator sealed edge first.

0:08 1:52 How to Unjam a Pouch Laminator - YouTube YouTube Start of suggested clip End of suggested clip When removing a project that is tangled in the rollers. It is highly recommended never to use aMoreWhen removing a project that is tangled in the rollers. It is highly recommended never to use a blade to cut it off if you cut the roller. Then will affect all your laminating projects.

The laminator will need some time to warm up. Some devices can take up to 10 minutes to warm up, so it's a good idea to turn on your laminator ahead of time. When the machine is ready, the “ready” light will go on.

Wait for the blue Ready light to come on, which indicates the laminator is warm enough for use. so that your item is close to or touching the sealed edge of the pouch (Figure 2). Do not cut the pouch if your item is much smaller than the size of the pouch or the pouch will likely become jammed inside the laminator.

An adhesive is applied to the less absorbent substrate web, followed by the pressing of the second web to form a duplex, or two-layer, laminate. The excess adhesive is removed by a blade, and the laminate is wound on a roll. The finished laminate can be used as a packaging material, a printing substrate, or a label.

0:23 1:34 GBC Ultima 65 - Film Tension Adjustment - 1710740 - YouTube YouTube Start of suggested clip End of suggested clip And should not need to be adjusted. Often indicators that tension needs to be adjusted includesMoreAnd should not need to be adjusted. Often indicators that tension needs to be adjusted includes wrinkles caused by insufficient tension stretching caused by too much tension.

0:53 1:53 How to Use a Fellowes Laminator-Fellowes ... - YouTube YouTube Start of suggested clip End of suggested clip Press the release reverse. Button to eject the document for proper insertion. If your laminatingMorePress the release reverse. Button to eject the document for proper insertion. If your laminating multiple documents the autosense feature will automatically sense the differences in pouch thickness.