Get Sht3x Sample Code

Advanced Technology. company which has the humidity detection accuracy of ±3% and temperature detection accuracy of ±0.3℃. The production process is strictly supervised to ensure high quality.

In this blog we look at the Sensirion SHT3x Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we have some that have a true I2C interface for easy reading. The SHT30 sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses.

Sensirion SHT30 is relative humidity and temperature sensor. It has good accuracy (0.2 °C for temperature and 2 percent points for humidity). This accuracy is in 0-65°C temperature range and 10-90% RH range.

In normal projects, DHT11 is sufficient. The measurement range of 5 ~ 95% RH will satisfy most applications. If your arduino project needs a wider measurement range and higher accuracy, such as medical, weather station, then we recommend DHT22.

The accuracy range of an RH sensor is expressed as something like "Typical +/- 2% Maximum +/- 3%". What this means is that the reading from the sensor is expected and calibrated to be within 2% in most cases, but up to 3% of the actual relative humidity in the environment.

Here is the tutorial of DHT11 with Arduino. Step 1: Material You Needs. You will need: DHT11 Sensor Module. Arduino Uno R3. ... Step 2: Pin Out. - DHT11 --> GND Arduino. out DHT11 --> A0 Arduino. + DHT11 --> +5V Arduino. ... Step 3: Code. #include<dht.h> dht DHT11; #define DHT11_PIN A0. ... Step 4: Check the Result. Tip Question Comment.

The SHT31-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses.

Humidity Sensor (DHT22) The DHT-22 (also named as AM2302) is a digital-output, relative humidity, and temperature sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and sends a digital signal on the data pin.