Get Swms Concreting

identify the work that is high risk construction work. specify hazards relating to the high risk construction work and the risks to health and safety. describe the measures to be implemented to control the risks, and. describe how the control measures are to be implemented, monitored and reviewed.

High risk construction work involves a risk of a person falling more than 2 m. is carried out on a telecommunication tower. involves demolition of an element of a structure that is load-bearing. ... involves structural alteration or repair that requires temporary support to prevent collapse.

The content of a SWMS will normally include the following information: list what types of high risk work are being conducted. state what the risks of the work are. eliminate risks where possible; where not, explain how those risks will be controlled, ie safety equipment or administrative controls.

Details of the organisation in control of the activity. Details of the individual responsible for the activity. A description of the activity. A description of how the work will be managed.

What is a SWMS? A SWMS is a document that sets out the high risk construction work activities to be carried out at a workplace, the hazards arising from these activities and the measures to be put in place to control the risks.

a) Kick Back. ... b) Inverted Cutting. ... c) Noise Generation. ... d) Gases & Dust. ... e) Manual Tasks. ... f) Electricity. ... g) Vacuum Pressure Loss.

the supervisor of the high risk construction work. the worker carrying out the high risk construction work. the principal contractor (if it is a construction project) or the person who has management and control over the high risk construction work.

identify the work that is high risk construction work. specify hazards relating to the high risk construction work and the risks to health and safety. describe the measures to be implemented to control the risks, and. describe how the control measures are to be implemented, monitored and reviewed.

Concrete cutting produces dust which can contain silica, a harmful compound when exposed in air. ... Exposure to airborne crystalline silica can put workers at risk of developing silicosis, a non-curable lung disease caused by accumulation of silica dust in the lungs.

The project. The activity. Date of assessment. Assessor. Responsibilities. Hazards (or reference to relevant risk assessment) Work procedure and control measures. Sequence of work. Access provisions. Security and safety of others. Techniques. ... PPE requirements.

The details of the construction work that is considered high risk. The health and safety hazards relating to the work. The control measures that need to be implemented to minimise or remove the risks. How the control measures will be actioned? When will they be monitored and reviewed?

Not taking unnecessary risks. Always look out for hazards. Always use Personal Protective Equipment (PPE) If you must smoke, do so only in designated areas. Keep your work area clean and tidy. Enter and leave the workplace using proper routes.