Get Appendix B Training Verification Form For Fall Protection

Fall protection training typically expires 3 years after the completion of a certified course. However, some companies may require employees to get recertification on a more frequent basis.

ing to OSHA guidelines, fall protection equipment must undergo an annual inspection.

There is no such thing as a predetermined or mandated expiration date on fall protection harnesses. Neither OSHA nor ANSI have current codes or standards that set a specific time period for taking a harness out of service. Even most manufacturers will not suggest how long a harness will last.

Except as provided in § 1926.500(a)(2) or in § 1926.501 (b)(1) through (b)(14), each employee on a walking/working surface 6 feet (1.8 m) or more above lower levels shall be protected from falling by a guardrail system, safety net system, or personal fall arrest system.

As a general matter, each worker on a walking or working surface 6 feet or more above a lower level must be protected from falling by a guardrail system, a safety net system, or a personal fall arrest system.

The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.

The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.

OSHA mandates that workers exposed to fall hazards must be trained. How often, though? The answer Is clear in the OSHA fall protection regulations. Every two years, you need to provide new fall protection certifications for competent persons.