Get 16152 Tpo Adhesion Promoter - Pro Form Products

You will need to apply an adhesion promoter or plastic primer to optimise the anchoring of the subsequent coats. Another option is to repair the plastic part. In this case, the part has lost the primer coat, so the adhesion promoter will have to be applied again to optimise the paint's anchoring.

DRY & RECOAT Dries to touch in 10 minutes and dries to handle in 15-30 minutes. A topcoat must be applied within 10 minutes after primer application.

With a new clean folded cloth, wipe off the 3M AP596 Adhesion Promoter in the same manner, flipping the cloth at regular intervals to reveal a clean section. Wait 15 minutes to dry.

A: Yes you could but the adhesion promoter would be best used after the primer is applied and prepped. Adhesion promoter for your base coat. Adhesion promoter is made to paint stick if you use a good primer you sh… see more.

Adhesion promoters are used when bonding two surfaces that may not stick together easily, such as plastics, metals and composites. An adhesion promoter can improve the bond between these dissimilar surfaces by providing a chemical interaction between the adhesive material and the substrate.

You will need to apply an adhesion promoter or plastic primer to optimise the anchoring of the subsequent coats. Another option is to repair the plastic part. In this case, the part has lost the primer coat, so the adhesion promoter will have to be applied again to optimise the paint's anchoring.

The key difference between adhesion promoter and primer is their function; adhesion promoters act as additives for the paint to promote the adhesion of the paint film to the substrate, but adhesion primers conserve the surface of a material having bonded in a later stage.