Get First-time Permittee Or Tank Owner Request For - Department Of ...

You are required to have these tested every 3 years to verify that all are functional. Make sure you have a current passing test within the last 3 years. The form for the overfill protection test is this overfill test form. Retain this record for at least 3 years.

Any schedules of required calibration and maintenance provided by the release detection equipment manufacturer must be retained for five years from the date of installation.

Cathodic Protection  Keep records of 60-day inspections for your impressed current corrosion (last three inspections), cathodic protection tests (last two tests), and documents showing that your system was properly repaired.

EPA established the 1988 federal underground storage tank technical regulation and state program approval regulation, which EPA subsequently revised in 2015. The technical regulation required UST owners and operators to prevent leaks, detect leaks quickly, and clean up leaks quickly and safely.

(2) Overfill prevention equipment must be inspected at least once every three years. At a minimum, the inspection must ensure that overfill prevention equipment is set to activate at the correct level specified in § 280.20(c) and will activate when regulated substance reaches that level.

Owners and operators must maintain records of overfill prevention equipment inspections for at least three years.

Every three years, owners and operators must test double-walled spill buckets and containment sumps if they choose not to periodically monitor the integrity of both walls; see 40 CFR 280.35(a)(1)(ii).