Get Florida Blanket Permit 2024

An overweight/oversize permit is required to move a vehicle or combination of vehicles (including load) of a size or weight that exceeds the maximum size or weight established by law over state highways. These permits may be obtained from the Florida Department of Transportation Permits Office.

Even without Arnold's explanation, you've probably figured out that a "permitted load" is (or sometimes can be) a load that has been granted a permit, because it's too big or too heavy to be transported legally without one. In other words, a "permitted load" is a load that is forbidden unless it is permitted.

A Blanket Permit is the written authorization granted by the Commissioner of Motor Vehicles for the movement of a vehicle or combination vehicle and its nondivisible load with prescribed limits of size and/or weight over State/Interstate highways. ...

In general, the maximum legal load width is 8.5 feet (102 inches), and the maximum height limit is also 102 inches. Legal length is typically 48 to 53 feet, and the maximum weight is about 46,000 pounds. Some trucks may be able to scale heavier, but 46,000 pounds is usually the standard.

You may call (850) 410-5777 to speak with a Permit Technician who can provide guidance in completing the online application process for oversized/over-weight permits using the Permit Application Sysytem (PAS).

In the United States, an oversize load is a vehicle and/or load that is wider than 8 ft 6 in (2.59 m). Each individual state has different requirements regarding height and length (most states are 13 ft 6 in or 4.11 m tall), and a driver must purchase a permit for each state he/she will be traveling through.

Loads exceeding 8.5 feet wide are considered oversize and require a state permit.

These restrictions may also vary according to the size of the oversize load: for example, loads greater than 10 feet wide may be restricted to daylight hours, while oversize loads no more 10 ft. wide may move at night on Interstates and four-lane divided highways.

Loads exceeding 8.5 feet wide are considered oversize and require a state permit.

As a general rule any truck-trailer-load combination exceeding 80,000 lbs. gross weight is considered overweight. Overweight loads must be non-divisible. Divisible loads are loads that can be reduced in weight within an eight (8) hour period without damaging the load.