Get Scanner Maintenance

Clean your scanner regularly to make sure that no dust builds up on the glass scanning surfaces. Dust can cause spots or lines in your scanned images. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.

Clean your scanner regularly to make sure that no dust builds up on the glass scanning surfaces. Dust can cause spots or lines in your scanned images. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.

Just because it isn't working correctly doesn't necessarily mean it needs replacing; let us help instead! The AES team has developed a proven process for accurately diagnosing, repairing, and restoring scanners along with other types of commercial imaging equipment.

ItemPurpose 1. Stepper Motor Powers the transmission belt 2. Logic Board Relays information to and from the scanner and the computer 3. Scanning Unit/Carriage Contains a light source and CCD sensors 4. Transmission Belt Moves the scanning unit across the image4 more rows

Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case.

Open scanner lid and locate the Brake, Pick, and Idler Rollers. Carefully, remove the brake roller from the scanner (Pick and idler rollers should be left in the scanner and manually rotated when cleaning). Use a cleaning wipe to clean off any dirt or dust along the grooves of the roller.

The scanner's primary function is to scan or take pictures of a document, digitize the information, display it on your screen, and store it on your connected computer.

Cleaning Inside Your Scanner Turn off the scanner and unplug the AC adapter. Disconnect any connected cables. Pull down on the cover open lever and open the scanner cover. Use a soft, dry cloth to wipe off any dust or dirt on the rollers inside the scanner cover. Wipe off any dust or dirt on the pickup rollers.

Unplug the power cord. Clean the outer case with a cloth dampened with mild detergent and water. If the glass of the document table gets dirty, clean it with a soft dry cloth. If the glass is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it.

CT Scanner Preventive Maintenance Checking the mechanical movements (gantry and couch) Checking/Cleaning the slip ring, brushes, and fans. Dust cleaning. Checking the error log and software. Observing the system under operation (LEDs, batteries, messages, etc.) X-ray tube filament current adjustment. Calibration.

Scanner Maintenance Tips Clean your scanner once a week. Set a reoccurring calendar reminder on your email to clean your scanner each week. ... Cleaning the outside of the scanner. ... Cleaning the inside of the scanner. ... Replace scanner maintenance kit. ... Reference your operator's guide. ... Replace the brake and pick rollers.

Use only glass cleaner. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl (rubbing) alcohol because it can leave streaks on the glass.

Clean your scanner regularly to make sure that no dust builds up on the glass scanning surfaces. Dust can cause spots or lines in your scanned images. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.

Clean your scanner regularly to make sure that no dust builds up on the glass scanning surfaces. Dust can cause spots or lines in your scanned images. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.

Just because it isn't working correctly doesn't necessarily mean it needs replacing; let us help instead! The AES team has developed a proven process for accurately diagnosing, repairing, and restoring scanners along with other types of commercial imaging equipment.

ItemPurpose 1. Stepper Motor Powers the transmission belt 2. Logic Board Relays information to and from the scanner and the computer 3. Scanning Unit/Carriage Contains a light source and CCD sensors 4. Transmission Belt Moves the scanning unit across the image4 more rows

Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case.

Open scanner lid and locate the Brake, Pick, and Idler Rollers. Carefully, remove the brake roller from the scanner (Pick and idler rollers should be left in the scanner and manually rotated when cleaning). Use a cleaning wipe to clean off any dirt or dust along the grooves of the roller.

The scanner's primary function is to scan or take pictures of a document, digitize the information, display it on your screen, and store it on your connected computer.

Cleaning Inside Your Scanner Turn off the scanner and unplug the AC adapter. Disconnect any connected cables. Pull down on the cover open lever and open the scanner cover. Use a soft, dry cloth to wipe off any dust or dirt on the rollers inside the scanner cover. Wipe off any dust or dirt on the pickup rollers.

Unplug the power cord. Clean the outer case with a cloth dampened with mild detergent and water. If the glass of the document table gets dirty, clean it with a soft dry cloth. If the glass is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it.

CT Scanner Preventive Maintenance Checking the mechanical movements (gantry and couch) Checking/Cleaning the slip ring, brushes, and fans. Dust cleaning. Checking the error log and software. Observing the system under operation (LEDs, batteries, messages, etc.) X-ray tube filament current adjustment. Calibration.

Scanner Maintenance Tips Clean your scanner once a week. Set a reoccurring calendar reminder on your email to clean your scanner each week. ... Cleaning the outside of the scanner. ... Cleaning the inside of the scanner. ... Replace scanner maintenance kit. ... Reference your operator's guide. ... Replace the brake and pick rollers.

Use only glass cleaner. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl (rubbing) alcohol because it can leave streaks on the glass.

Clean your scanner regularly to make sure that no dust builds up on the glass scanning surfaces. Dust can cause spots or lines in your scanned images. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.

Clean your scanner regularly to make sure that no dust builds up on the glass scanning surfaces. Dust can cause spots or lines in your scanned images. Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.

Just because it isn't working correctly doesn't necessarily mean it needs replacing; let us help instead! The AES team has developed a proven process for accurately diagnosing, repairing, and restoring scanners along with other types of commercial imaging equipment.

ItemPurpose 1. Stepper Motor Powers the transmission belt 2. Logic Board Relays information to and from the scanner and the computer 3. Scanning Unit/Carriage Contains a light source and CCD sensors 4. Transmission Belt Moves the scanning unit across the image4 more rows

Never use alcohol, thinner, or corrosive solvent to clean the scanner. These chemicals can damage the scanner components as well as the case.

Open scanner lid and locate the Brake, Pick, and Idler Rollers. Carefully, remove the brake roller from the scanner (Pick and idler rollers should be left in the scanner and manually rotated when cleaning). Use a cleaning wipe to clean off any dirt or dust along the grooves of the roller.

The scanner's primary function is to scan or take pictures of a document, digitize the information, display it on your screen, and store it on your connected computer.

Cleaning Inside Your Scanner Turn off the scanner and unplug the AC adapter. Disconnect any connected cables. Pull down on the cover open lever and open the scanner cover. Use a soft, dry cloth to wipe off any dust or dirt on the rollers inside the scanner cover. Wipe off any dust or dirt on the pickup rollers.

Unplug the power cord. Clean the outer case with a cloth dampened with mild detergent and water. If the glass of the document table gets dirty, clean it with a soft dry cloth. If the glass is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it.

CT Scanner Preventive Maintenance Checking the mechanical movements (gantry and couch) Checking/Cleaning the slip ring, brushes, and fans. Dust cleaning. Checking the error log and software. Observing the system under operation (LEDs, batteries, messages, etc.) X-ray tube filament current adjustment. Calibration.

Scanner Maintenance Tips Clean your scanner once a week. Set a reoccurring calendar reminder on your email to clean your scanner each week. ... Cleaning the outside of the scanner. ... Cleaning the inside of the scanner. ... Replace scanner maintenance kit. ... Reference your operator's guide. ... Replace the brake and pick rollers.

Use only glass cleaner. Avoid abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl (rubbing) alcohol because it can leave streaks on the glass.