Get Form 406

Updates and renewals can be made using the same registration methods listed below. 3. Register new or previously unregistered EPIRBs and PLBs with NOAA via the internet at: .beaconregistration.noaa.gov. Note: Registration is mandatory and is required by Federal Regulation.

All Model E-04 ELT's are factory programmed with this protocol and have USA (country code 366) as the country code.

The National Beacon Registration Database for U.S. coded beacons is available online. Emergency beacon owners can register and update their beacons directly via the internet. If you purchase a new or used U.S. coded 406 MHz beacon you MUST register it with NOAA as required by law.

This can be done in a number of ways: Log in to your online beacon account. Select 'Change beacon status' and follow the prompts. Email ausbeacon@amsa.gov.au. ... Phone 1800 406 406. ... Download the 'Change in ownership' form (Word 70Kb) (also available in PDF 226Kb) and return to AMSA as described on the form.

Most beacon information can be found on the actual beacon, its manufacturer label, or its packaging Beacon ID This number is ON the beacon and on the manufacturer-supplied label. It can be called a "UIN" or "Hex ID" or "15 Hex ID" or "15-digit Hex ID" or 23-Hex ID.

The beacon ID is located on the manufacturer's sticker, which is on your beacon. If you cannot find the beacon ID, contact the beacon manufacturer.

If an unregistered EPIRB transmission is abbreviated for any reason, the satellite will be unable to determine the EPIRB's location, and the Coast Guard will be unable to respond to the distress alert. Unregistered EPIRBs have needlessly cost the lives of several mariners since the satellite system became operational.

The National Beacon Registration Database for U.S. coded beacons is available online. Emergency beacon owners can register and update their beacons directly via the internet. If you purchase a new or used U.S. coded 406 MHz beacon you MUST register it with NOAA as required by law.