Cal Trac Bar Installation In Wayne
Description
Form popularity
FAQ
Calvert Racing, Inc.
It uses a single ladder bar that attaches to brackets welded onto the axle housing, in front it attaches to the frame with a shackle. This arrangement prevents the axle housing from rotating under acceleration and braking while still allowing the suspension to move through its range of travel freely.
In addition to improving consistent 60-foot times, Calvert Racing's patented CalTracs eliminate axle rotation AND improve traction, especially on hard acceleration.
Those those leaf springs traction bars lock onto the leaf spring. And when they go to warp. TheMoreThose those leaf springs traction bars lock onto the leaf spring. And when they go to warp. The traction bar jumps up so this part here jumps up and hits the leaf spring which prevents wheel hop.
The pivot at the front leaf eyelet then forces the pin riding on top of the springs downward into the spring pack itself. This downward force of the pin on the leaf springs causes down force on the entire axle assembly and pushes your tires down onto the pavement/dirt.
The pivot at the front leaf eyelet then forces the pin riding on top of the springs downward into the spring pack itself. This downward force of the pin on the leaf springs causes down force on the entire axle assembly and pushes your tires down onto the pavement/dirt.
We suggest a pinion angle to be between -2 to -4 degrees when used with CalTracs.
Traction bars are a must on any truck in all honesty. It allows the truck to shift a lot nicer, and keeps the rear end more stable. I'll never remove mine or run a truck without them. My truck needless to say is way more fun to drive and rides a hell of a lot better.
And downwards. Position as a driver you notices most in a couple different ways the rear end willMoreAnd downwards. Position as a driver you notices most in a couple different ways the rear end will kind of walk around kind of feel loose. Especially. If you're towing something heavy.
