The purpose of an asbestos survey is to locate, as far as reasonably practicable, the presence and extent of any suspect asbestos containing material in the building and assess their condition. This survey essentially defers the need to sample and analyze for asbestos (or the absence thereof) until a later time (e.g., prior to demolition or major refurbishment). All areas should be accessed and inspected as far as reasonably practicable (e.g., above false ceilings and inside risers, service ducts, lift shafts, etc.) or must be presumed to contain asbestos. Any material which can reasonably be expected to contain asbestos must be presumed to contain asbestos, and where it appears highly likely to contain asbestos, there should be a strong presumption that it does. All materials which are presumed to contain asbestos must be assessed.
This form is a generic example that may be referred to when preparing such a form for your particular state. It is for illustrative purposes only. Local laws should be consulted to determine any specific requirements for such a form in a particular jurisdiction.
Montana Asbestos Disclosure Statement Regarding Asbestos Survey Before Demolition is a legal document that aims to notify and inform individuals involved in demolition activities in Montana about the potential presence of asbestos materials in the structure or surrounding area. Asbestos, a naturally occurring mineral fiber, was widely used in building materials until the 1970s due to its heat resistance and durability. However, it was later discovered that exposure to asbestos fibers could cause serious health issues, including lung diseases such as asbestos is and mesothelioma. This disclosure statement is essential before any demolition work begins as it helps protect the health and safety of workers and nearby residents. The statement must be provided by the property owner or the person responsible for the demolition, highlighting whether an asbestos inspection or survey has been conducted. If an inspection has been completed, specific details about the findings, including the presence of asbestos-containing materials (ACMs) and their locations, must be included. Key elements that should be covered within the Montana Asbestos Disclosure Statement include: 1. Background Information: A brief introduction is provided, explaining the purpose of the document and the potential risks associated with asbestos exposure during demolition. 2. Identification of Parties: The document should clearly identify the property owner, the responsible individual or company, the date of disclosure, and any relevant contact information. 3. Description of Property: A detailed description of the property is included, highlighting its address, size, and any other notable features that may influence the scope of the asbestos survey. 4. Asbestos Survey Information: This section should specify whether an asbestos survey has been conducted prior to the demolition. Different types of asbestos surveys may be mentioned depending on their level of detail and comprehensiveness. These may include: a. Limited Asbestos Survey: This type of survey is often performed in buildings or structures where only certain portions or materials will be affected by the demolition. It aims to identify any ACMs that may be disturbed during the demolition works. b. Comprehensive Asbestos Survey: This survey involves a more thorough inspection of the entire property, examining all potential asbestos-containing materials. It provides a comprehensive overview of ACMs present, their condition, and recommended actions for proper handling during demolition. c. Asbestos Survey With Analysis: In this type of survey, collected samples suspected to contain asbestos are sent for laboratory analysis to confirm the presence of asbestos fibers. This additional step ensures accurate identification of ACMs within the property. 5. Asbestos Findings: If an asbestos survey was conducted, the disclosure statement should outline the findings, indicating whether ACMs were identified, their locations, and their condition (whether intact or damaged). This serves as crucial information for asbestos removal or abatement plans. 6. Asbestos Mitigation Plan: If asbestos-containing materials were identified, this section should outline the steps that will be taken to safely manage or remove the ACMs before demolition. It may include information about certified asbestos professionals who will be hired to perform the necessary work. 7. Signature and Consent: The document should conclude with a section for signatures, indicating that the property owner acknowledges the presence of asbestos, understands the survey findings, and consents to the recommended asbestos management plan. It is important to note that the Montana Asbestos Disclosure Statement Regarding Asbestos Survey Before Demolition requirements may vary depending on local regulations and guidelines. Therefore, it is advisable to consult relevant state authorities to ensure compliance.Montana Asbestos Disclosure Statement Regarding Asbestos Survey Before Demolition is a legal document that aims to notify and inform individuals involved in demolition activities in Montana about the potential presence of asbestos materials in the structure or surrounding area. Asbestos, a naturally occurring mineral fiber, was widely used in building materials until the 1970s due to its heat resistance and durability. However, it was later discovered that exposure to asbestos fibers could cause serious health issues, including lung diseases such as asbestos is and mesothelioma. This disclosure statement is essential before any demolition work begins as it helps protect the health and safety of workers and nearby residents. The statement must be provided by the property owner or the person responsible for the demolition, highlighting whether an asbestos inspection or survey has been conducted. If an inspection has been completed, specific details about the findings, including the presence of asbestos-containing materials (ACMs) and their locations, must be included. Key elements that should be covered within the Montana Asbestos Disclosure Statement include: 1. Background Information: A brief introduction is provided, explaining the purpose of the document and the potential risks associated with asbestos exposure during demolition. 2. Identification of Parties: The document should clearly identify the property owner, the responsible individual or company, the date of disclosure, and any relevant contact information. 3. Description of Property: A detailed description of the property is included, highlighting its address, size, and any other notable features that may influence the scope of the asbestos survey. 4. Asbestos Survey Information: This section should specify whether an asbestos survey has been conducted prior to the demolition. Different types of asbestos surveys may be mentioned depending on their level of detail and comprehensiveness. These may include: a. Limited Asbestos Survey: This type of survey is often performed in buildings or structures where only certain portions or materials will be affected by the demolition. It aims to identify any ACMs that may be disturbed during the demolition works. b. Comprehensive Asbestos Survey: This survey involves a more thorough inspection of the entire property, examining all potential asbestos-containing materials. It provides a comprehensive overview of ACMs present, their condition, and recommended actions for proper handling during demolition. c. Asbestos Survey With Analysis: In this type of survey, collected samples suspected to contain asbestos are sent for laboratory analysis to confirm the presence of asbestos fibers. This additional step ensures accurate identification of ACMs within the property. 5. Asbestos Findings: If an asbestos survey was conducted, the disclosure statement should outline the findings, indicating whether ACMs were identified, their locations, and their condition (whether intact or damaged). This serves as crucial information for asbestos removal or abatement plans. 6. Asbestos Mitigation Plan: If asbestos-containing materials were identified, this section should outline the steps that will be taken to safely manage or remove the ACMs before demolition. It may include information about certified asbestos professionals who will be hired to perform the necessary work. 7. Signature and Consent: The document should conclude with a section for signatures, indicating that the property owner acknowledges the presence of asbestos, understands the survey findings, and consents to the recommended asbestos management plan. It is important to note that the Montana Asbestos Disclosure Statement Regarding Asbestos Survey Before Demolition requirements may vary depending on local regulations and guidelines. Therefore, it is advisable to consult relevant state authorities to ensure compliance.
