The Plugging of Wells form, the assignee shall plug all wells not capable or no longer capable of producing oil or gas in paying quantities and shall restore the lands around any such well in a manner that meets all requirements of any governmental agency having jurisdiction and the oil and gas lease on which the well is located.
New Hampshire Plugging of Wells refers to the process of sealing abandoned or non-compliant wells in the state of New Hampshire to protect groundwater quality and prevent contamination. This important procedure ensures the proper closure and abandonment of wells that are no longer in use, mitigating potential risks to both human health and the environment. There are various types of New Hampshire Plugging of Wells, including: 1. Abandoned Well Plugging: This type of well plugging involves sealing wells that have been left unused or neglected and do not meet the state's regulatory requirements. These wells are typically filled with a specialized grout material to prevent any future flow of water or contaminants. 2. Non-Compliant Well Plugging: Non-compliant wells are those that fail to meet the current state standards for well construction or have been determined to pose a potential risk to groundwater quality. These wells also need to be properly sealed and plugged according to the specific guidelines outlined by the New Hampshire Department of Environmental Services (NODES). 3. Well Decommissioning: When a well is no longer needed, whether due to a property transfer, a change in water supply source, or other reasons, it should be decommissioned following specific protocols. Well decommissioning involves safely sealing the well to prevent any future access to groundwater, ensuring it is permanently taken out of service. The New Hampshire Plugging of Wells program enforces regulations and guidelines set by the NODES to protect public health and prevent groundwater contamination. It aims to safeguard water resources, maintain water quality standards, and reduce potential risks associated with abandoned or non-compliant wells. The plugging process typically involves inspecting the well site, removing any obstructions or debris, gathering relevant information about the well, and determining the appropriate plugging method. Depending on the well's characteristics and location, various plugging techniques such as grouting or casing removal may be employed. Properly plugged wells are essential to prevent the migration of surface contaminants or pollutants into precious groundwater sources. The New Hampshire Plugging of Wells program promotes responsible well closure and ensures compliance with state regulations to maintain the long-term sustainability of water resources for both current and future generations. By prioritizing the safe and effective plugging of abandoned or non-compliant wells, New Hampshire aims to protect its water supplies, preserve environmental integrity, and promote the well-being of its residents.New Hampshire Plugging of Wells refers to the process of sealing abandoned or non-compliant wells in the state of New Hampshire to protect groundwater quality and prevent contamination. This important procedure ensures the proper closure and abandonment of wells that are no longer in use, mitigating potential risks to both human health and the environment. There are various types of New Hampshire Plugging of Wells, including: 1. Abandoned Well Plugging: This type of well plugging involves sealing wells that have been left unused or neglected and do not meet the state's regulatory requirements. These wells are typically filled with a specialized grout material to prevent any future flow of water or contaminants. 2. Non-Compliant Well Plugging: Non-compliant wells are those that fail to meet the current state standards for well construction or have been determined to pose a potential risk to groundwater quality. These wells also need to be properly sealed and plugged according to the specific guidelines outlined by the New Hampshire Department of Environmental Services (NODES). 3. Well Decommissioning: When a well is no longer needed, whether due to a property transfer, a change in water supply source, or other reasons, it should be decommissioned following specific protocols. Well decommissioning involves safely sealing the well to prevent any future access to groundwater, ensuring it is permanently taken out of service. The New Hampshire Plugging of Wells program enforces regulations and guidelines set by the NODES to protect public health and prevent groundwater contamination. It aims to safeguard water resources, maintain water quality standards, and reduce potential risks associated with abandoned or non-compliant wells. The plugging process typically involves inspecting the well site, removing any obstructions or debris, gathering relevant information about the well, and determining the appropriate plugging method. Depending on the well's characteristics and location, various plugging techniques such as grouting or casing removal may be employed. Properly plugged wells are essential to prevent the migration of surface contaminants or pollutants into precious groundwater sources. The New Hampshire Plugging of Wells program promotes responsible well closure and ensures compliance with state regulations to maintain the long-term sustainability of water resources for both current and future generations. By prioritizing the safe and effective plugging of abandoned or non-compliant wells, New Hampshire aims to protect its water supplies, preserve environmental integrity, and promote the well-being of its residents.
