Fit Break Form For Free

Look at what your brake is called (it's usually written on the lever reservoir and/or the caliper body) and then find a disc pad of the same name. If the model names don't quite match or are incomplete, take your exisiing pads out and double-check the shape of them compared to the potential replacement pads' shape.

Air in the brake line(s) is the most common cause of a soft/spongy brake pedal. If air gets into the brake lines, it can prevent brake fluid from flowing properly, causing the brake pedal to feel spongy or soft. If the brakes are soft or spongy, this is a good time to change or flush the brake fluid.

If you have experience with basic repair brake pad replacement can be done in 4 hours. Changing front brake pads is simpler than replacing rear disc brakes, and if you have experience doing basic repairs the job will take about 4 hours.

Not all brake pads come with shims as they aren't required and function perfectly without needing them. It is often misdiagnosed that the brake rotors themselves are the cause of excessive brake noise such as squeaking or squealing when using moderate brake pedal pressure.

To adjust disc brakes all you need to do is pump the brakes a few times with the engine off, start the engine, pump the brakes a few more times, and then make a few stops with the car. The disc brakes are now adjusted and will remain that way through normal use.

?Changing your own brake pads is a very simple and inexpensive procedure that mechanics and specialty brake shops will charge hundreds of dollars to do,? Reina said.

How to adjust your brake cables Pull the brake lever to judge how tight or loose your brakes are.Tighten or loosen the barrel adjuster accordingly.Loosen the bolt on the brake caliper to readjust.Pull or release the brake cable through the caliper.Tighten the caliper bolt back up.Check your brake pads.