Load Paper For Free

Paper is housed in the printer's paper tray, and most trays can be found along the bottom of the printer. There is usually a small notch on the face of the tray that pulls out so you can insert the paper.

Cause and SolutionCheck 1: Confirm the paper source setting for plain paper.Check 2: Make sure that paper is loaded.Paper Sources to Load Paper.Check 3: Make sure of the following when you load paper.Paper Sources to Load Paper.Check 4: Check to see if the paper you are printing on is not too thick or curled.More items...?Jul 22, 2011

Solution one: Reset the productWith the printer turned on, disconnect the power cord from the rear of the printer.Unplug the power cord from the wall outlet.Wait at least 15 seconds.Plug the power cord back into the wall outlet.Reconnect the power cord to the printer.Turn the printer on.

The paper is too slick for the product. The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper settings in the print driver do not match the paper loaded in the paper tray.

If you keep on getting error messages saying there is no paper in the printer, check the paper rollers and clean any specks of dust or debris. Also, make sure the paper stack is not wrinkled or bent. Take out the stack of paper and push the tray back in. Take it out again and put back the paper.

Cause and Solution If the paper cassette or multi-purpose tray is empty, the message <LOAD PAPER> appears on the display. Check if the paper is properly loaded in the paper cassette or multi-purpose tray.

The paper trays are empty or overloaded.The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.