Style Seal Pdf For Free

Radial seals and face seals vary in the direction in which compression is achieved for sealing. Radial seals compress to both the outside diameter and inside diameter. Face seals differ in compression (or squeeze), which is applied to both the top and bottom of the sealing system's cross sections.

They are used to seal around a rotating shaft and provide protection from dirt intrusion while retaining an oil-based lubricant within the shaft. TCM Shaft Seal Designs.

The color indicates the material the o-ring is made of. Black o-rings are Buna-N, redish brown o-rings are silicone, green are "Highly Saturated Nitrile"(had to google that one).

The difference between radial seals and axial seals boils down to the direction in which compression is applied to the seal cross sections. With radial seals, compression is applied to the outside and inside diameter. Whereas, axial seals have compression applied to the top and bottom of the seal's cross sections.

The 8 most important considerations for custom gasket design include: The function of your custom gasket. Regulatory requirements for your application. The environment your custom gasket will live in. The temperature range for your custom gasket. Selection of your gasket material. The manufacturability of your custom design.

Different Types of Lip Seals You can find lip seals with a single lip, two lips or even three lips. Lip seals are also available in spring-loaded and non-spring-loaded designs. Spring-loaded lip seals feature an integrated spring.

Many different seal profiles are available. Some of the most common are round, square, and X-shaped. These are shown in static axial grooves below.